Quantcast
Channel: Setup Deployment forum
Viewing all 2818 articles
Browse latest View live
↧

WDS and silent installation switches in unattend, not working

July 28, 2011, 8:24 am
$
0
0

To make a long story short: I am trying to deploy Windows 7 Enterprise x64 onto an HP EliteBook 8560w laptop, using WDS on Windows Server 2008 R2 Standard, with Driver Injection as our means of driver installation on the image.. Everything installs fine, except for the USB3.0, fingerprint, and wi-fi drivers. Running on a deadline here, I am trying to get these stubborn drivers to install silently to the image from a network share, with the designated Msiexec switches (since they're packaged as msi's as well) in the unattend.xml of the image. So if my share were, say "\\ABC" then my lines in the unattend would look like the below:

             <CommandLine>"\\ABC\NETLOGON\HPDrivers\fingerprint\EXTRACT\HPVFSSVC4.3.126.0.msi" Msiexec /i HPVFSSVC4.3.126.0.msi /q</CommandLine>
                    <Description>Call Fingerprint Reader</Description>
                    <Order>1</Order>
             <CommandLine>"\\ABC\NETLOGON\HPDrivers\sp52146-usb.exe\sp52146-usb\nusb3drv.msi" Msiexec /i nusb3drv.msi /q</CommandLine>
                    <Description>Call USB3.0 Controller</Description>
                    <Order>2</Order>

Can a fresh set of eyes out there on the forums maybe see where I am going wrong on this? Looking forward to your replies one and all--thank you in advance! :)

↧
Search

Failed to perform SP installation hr=0x800f0818 windows server 2008 SP1

January 9, 2014, 1:03 am
$
0
0

Hello i am not able to update Windows Server 2008 R2 sp1

2014-01-09 11:50:49, Info                  CBS    SPI: Created path: C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\readme\zh-tw\readmesp_server.htm
2014-01-09 11:50:49, Info                  CBS    SPI: Root directory being used: C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.xml.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.xml
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\SPWizUI.dll.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\SPWizUI.dll
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\SpError.dll.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\SpError.dll
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SpError.dll.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\SpError.dll.  0x800b0100
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\nt5.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\SpError.dll
2014-01-09 11:50:49, Info                  CBS    SPI: Loading SPError.dll contained at C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\SpError.dll
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\spinstall.exe.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\spinstall.exe.  0x800b0100
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\ntexe.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\spinstall.exe
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SPC_SP1_Wave1.xml.  0x57
2014-01-09 11:50:49, Error                 CBS    SPI: (SPCVerifyTrust:1664)Failed to CryptCATAdminCalcHashFromFileHandle GLE=0x57
2014-01-09 11:50:49, Info                  CBS    SPI: Installed SPInstall or XML not trusted.  Continuing with current version.
2014-01-09 11:50:49, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\EventProviders\spcmsg.dll.  0x57
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\44cbe0d878716c90620f5a5792\6eb59259151abd03e8dd7d27f47d9a\spc.cat
2014-01-09 11:50:49, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\EventProviders\spcmsg.dll
2014-01-09 11:50:49, Info                  CBS    SPI: No need to update spcmsg.dll event provider
2014-01-09 11:50:49, Info                  CBS    SPI: Reporting Started event
2014-01-09 11:50:49, Info                  CBS    SPI: SQM is not opted in
2014-01-09 11:50:49, Error                 CBS    SPI: (SPIRegQueryDWORDValue:413)Failed to query registry value: UploadDisableFlag er=0x2
2014-01-09 11:50:52, Info                  CBS    SPI: Starting SP Compatibility\Applicability scan
2014-01-09 11:50:52, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1. er=0x2
2014-01-09 11:50:52, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1. er=0x2
2014-01-09 11:50:52, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1. er=0x2
2014-01-09 11:50:52, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1. er=0x2
2014-01-09 11:50:52, Info                  CBS    Session: 30346519_3876783028 initialized by client SP Coordinater Engine.
2014-01-09 11:50:53, Info                  CBS    Mark store corruption flag because there is a mismatch between packageidentity and its content on package: Package_for_KB2791765_SP1~31bf3856ad364e35~amd64~~6.1.1.2. [HRESULT = 0x00000000 - S_OK]
2014-01-09 11:50:53, Info                  CBS    Identity mismatch: Specified Identity: Package_for_KB2791765_SP1~31bf3856ad364e35~amd64~~6.1.1.2, actual package Identity: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385 [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to resolve package [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to populate children. [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to initialize package: Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385, from path: \\?\C:\Windows\Servicing\Packages\Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7600.16385.mum, existing package: 1 [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to resolve package [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to populate children. [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to initialize internal package [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Info                  CBS    Failed to create package. [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Error                 CBS    Failed to internally open package. [HRESULT = 0x800f0818 - CBS_E_IDENTITY_MISMATCH]
2014-01-09 11:50:53, Error                 CBS    SPI: (CSPICbsClient::EnumPackages:156)Failed to open package hr=0x800f0818
2014-01-09 11:50:53, Error                 CBS    SPI: (CSystem::EnumerateCbsPackages:360)Failed to populate CBS package list hr=0x800f0818
2014-01-09 11:50:53, Info                  CBS    Session: 30346519_3876783028 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
2014-01-09 11:50:53, Info                  CBS    SPI: Failed enumerating CBS packages
2014-01-09 11:50:53, Error                 CBS    SPI: (GetLatestVersionFromCBSStore:131)ATL exception hr=0x800f0818
2014-01-09 11:50:53, Error                 CBS    SPI: (CSPCInstallTask::ApplicabilityScan:632)Failed to get latest version of Package_for_KB976902~31bf3856ad364e35~amd64~~6.1.1.17514 from the store hr=0x800f0818
2014-01-09 11:50:53, Error                 CBS    SPI: (CSPInstall::CompatibilityApplicabilityScan:1303)Failed in applicability check of task hr=0x800f0818
2014-01-09 11:50:53, Info                  CBS    SPI: Ending Compatibility\Applicability scan
2014-01-09 11:50:53, Error                 CBS    SPI: (PerformSPInstallation:833)Failed to install SP using UI hr=0x800f0818
2014-01-09 11:50:53, Error                 CBS    SPI: (wmain:1105)Failed to perform SP installation hr=0x800f0818
2014-01-09 11:50:53, Info                  CBS    SPI: Reporting Failed event

↧
↧

Creating boot images on WDS server 2012

January 9, 2014, 12:44 pm
$
0
0

Hello Everyone, I've a problem creating a list with boot images in WDS 2012.

I have installed WDS on a 2012 Server and booted a Windows 8.1 using PXE from this 2012 server and successfully captured an image which I can now see under install images in WDS. The same I want to do for a WindowsXP and a Windows 7 machine (all for educational use).

The issue is that I do not know how to get this install image to become a boot image so that I can use it for deployment. When I try to add the Windows 8.1 wim-file as a boot image I get an error "The file does not contain a valid boot image". How do I solve this?

Thank you very much for your support

Kind regards Arnold

↧

Volume Activation Management Tool invalid characters bug.

May 5, 2013, 10:00 pm
$
0
0
I have a Multiple Activation Key from my Technet subscription for Windows 8 Enterprise, and wanted to
find out how many activations I am allowed, and how many I have left. I was advised by a colleague to
download and install the Volume Activation Management Tool 2.0 from Microsoft.

Whilst using this tool, I've found what appears to be a rather serious bug. It does not allow entry of the
product key I wish to manage. If I copy/paste the key under Add Product Keys, it deliberately ignores
one of the characters in the second section of the product key, specifically the letter N.

If I attempt to enter the key manually, it says Invalid character in the product key when I come to this
particular letter. On further investigation, VAMT 2.0 sees several other letters as invalid characters.
It wrongly says all of the following letters are invalid characters - A - E - I - L - N - O - U - S - Z .

This bug makes it impossible to add the product key, and almost impossible to add any other key.
↧

Deploy existing image remotely via WDS

January 10, 2014, 4:56 am
$
0
0

Hi community,

Admin newbie here,

I want/need to deploy a Windows 7 image to computers that are in another office in another town. They are class room computers and we need to reinstall rather frequently. We do this here locally with WDS. We start the computers, press F12 and choose from a list of our different images.

The problem I have now is, I can't press F12 on the computers in the other office from here. I can wake them up (wake-on-lan), but then I don't know how to proceed. That's the way I imagine. Is there maybe another approach? E.g. push the image from the WDS server to the clients?  

Through googling I couldn't find anything that would allow me to do the above. I'm thankful for any hints.

Thank you in advance. 

↧
↧

2 NIC with 2 Subnets

January 10, 2014, 8:32 am
$
0
0

I've got to setup a Small server (2008) but I'm trying to know how to do a few simple things.

1) The network has 2 Networks a 10.10.x.x network that's connected to a Static IP & DLS Line, and a 192.168.x.x network that's connected to a Fiber Line (Dynamic IP Address)

2) The Server is only running as a Web server, but pulls data from a second computer on the 10.10.x.x network

3) We need to be able to access the Intranet Website from Either Network, so I'm guessing for both Networks the computer will need 2 Static IP Addresses

4) We would like for all Internet Calls (Web Services) that the server only uses the 192.168.x.x Network

I've done configurations for single Subnet networks, but not this dual network configuration.  Can it be done, and if so, how?

↧

WINDOWS Service on server

January 10, 2014, 6:02 pm
$
0
0
We have windows service which continuously process the files.
There are multiple database server each with one instance of this windows service. The service code has been optimized to improve the throughput.
1. What should be deployment strategy to enhance the through put?
2. Deployment on dedicated server for windows service would help?
3. any other suggestion
↧

Failed to set teh selected language as UI language.

October 22, 2013, 1:15 pm
$
0
0

I'm baffled. I've added boot.wim from 8.1 RTM and 2012 R2 RTM to a new WDS installation. The default language is en-us according to the file properties in WDS,  but it errors out on the client with: failed to set the selected language as the UI language. I cannot set it to en-us.  It works for any other English variant - just not the US.  I can get it work, for example, as English (Canada) with a US input.  But not English (united states). 

Jason Yates

↧
Search

Setup Switch, Internet Router on Domain

January 13, 2014, 2:56 am
$
0
0

Hi 

I have setup a domain controller windows 2008 R2. I want to know how to setup the Router and Switch so that clients can access the Domain and Internet. The router IP address is 10.0.0.2 and the Switch IP address is 10.0.0.3. I have plugged everything into the Switch. Please note I have two NIC's in the Server.

LAN NIC details are 10.0.0.3 subnet 255.0.0.0 gateway 10.0.0.3 DNS Server 127.0.0.1

WAN NIC details are 192.168.16.1 subnet 255.255.255.0 gateway 10.0.0.2 DNS Server 192.168.16.1

I have setup RRAS.

I either get internet or network connectivity (Domain) with various configurations I have tried. I imported the Firewall policy on the server that was there before as I reinstalled the Server.

Can someone suggest the best way to set this up so client machines can access the network (Domain) and internet.

↧
↧

Upgrade Windows Server 2008 to 2008 R2 over remote desktop

January 7, 2010, 8:40 pm
$
0
0
Hello,

I have a dedicated server that I have hosted in a remote datacenter.  The server is currently running Windows Server 2008 Standard x86.  It is not a part of a domain and it is the only server in the datacenter that I own.  I would like to upgrade this server to Windows Server 2008 R2 x64.  The catch is that I would prefer not to have to spend the money to have the datacenter's employees perform the upgrade for me.

Does anyone know if it is possible to do this upgrade via remote desktop and upon completion, be able to log back on via remote desktop, without any physical access to the machine at any point of the upgrade?  I am thinking there might be a way (cheap commercial software would be fine) to somehow automate the installation so that it does not need any user interaction whatsoever, or at least not until the machine is in a state that it can be connected to via remote desktop.

If anyone has any suggestions, they would be greatly appreciated.  Thanks!

Brian P. Hamachek
↧

Office 2010 Deployment via MDT 2012

January 13, 2014, 10:53 am
$
0
0

Am trying to deploy office 2010 using MDT 2012 but there is no "office product tab" under office 2010 properties even under office 2007.

I managed to deploy windows 7 OS but office is a problem.

Please help me.

↧

WDS unattended join

December 28, 2013, 12:12 am
$
0
0

Hello everyone!

I'm trying to unattended set up Windows 8.1, and I faced with some issues.

  1. In my unattended.xml I tried to name computers both like pc%02# and %MACHINENAME%. none of this worked
  2. when the computer tried to join to the domain, I see following error in Event Viewer: The computer XXX tried to join to the domain YYY but failed. Error code 234. EventID: 4097, Source: NetJoin

What's the reason of this behavior?

Checked: user in unattended.xml has enough rights to join to the domain. 

↧

Link to download the server 2008 r2 enterprise without service pack

January 14, 2014, 6:28 am
$
0
0

Hi,

Please provide the link to download the server 2008 r2 enterprise without service pack

Thank You!!

↧
↧

Windows 7 Deployment - Unattended.xml

January 14, 2014, 5:16 am
$
0
0

I have created a custom WIM using OOBE sysprep and placed it within a Windows 7 Pro directory from a Windows Pro DVD and placed on my WDS repository and the image installs fine via PXE boot.

However I am now trying to make installation Unattended, but without luck. I have created a autounattended.xml and placed it on the root of a USB and works great. However, if I place the same autounattend.xml in the root of my WDS repository and from a client press F12 to PXE boot it, it runs the setup.exe and doesn't read the autounattend.xml I get the OOBE splash screen, language etc.

What am I missing here? Please Help.   


↧

Server Upgrade Stuck at Completing Upgrade (34%)

January 14, 2014, 10:51 am
$
0
0

Hello Everyone,

We are into hosting and I am trying to upgrade one of out shared hosting server from Server 2003 SP2 standard to Server 2008 Standard. The installation is now struck at 34% at completing upgrade for hours now, under task manager I can see setup.exe and iis(so currently I thing that the IIS server is being upgraded) processes are using the resources. I think it has been 23hours now since I started the upgrade process.

Can anyone tell me if this is usual or there is something fishy going on ?

Thanks for you help in advance !!!




↧
Search

Autonaming the workstation

January 15, 2014, 2:02 am
$
0
0

Hi,

What is the best way to make sure a workstation gets the same name it had after re-imaging?

I have around 60 workstation that I have labeled with a name. The computers are in a school. I would like to be able to multicast all workstations, and make sure they get the name on the label again.

I do not have much experience with WDS. I remember with RIS that is was possible to attach a mac-->computername file with the deployment. But it's possible that i'm mistaken with novell zen imaging. Which was also a long time ago:)

I'm looking forward to your suggestions.

Best regards

Ruud Boersma

MCITP Enterprise administrator

↧

drivers picked from winpe pass instead of offlineServicing pass during unattend installation

January 15, 2014, 2:17 am
$
0
0

hi

I am doing an unattend installation and passed different driver locations in Windowspe pass and offlineServicing pass.

I went through the logs and it has processed the windowspe driver location in both the passes.

below is the snippet of answer file:

<settings pass="windowsPE">

         <component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                   <PathAndCredentials wcm:action="add" wcm:keyValue="01">
                    <Path>z:\script\nbannoth\</Path>
                </PathAndCredentials>
            </DriverPaths>
        </component>

 <settings pass="offlineServicing">
        <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DriverPaths>
                   <PathAndCredentials wcm:action="add" wcm:keyValue="01">
                    <Path>z:\script\madhmeht\</Path>
                </PathAndCredentials>
            </DriverPaths>
        </component>
    </settings>

this is the part of logs:

2014-01-15 14:34:03, Info                         PnPIBS: Entering PnP callback to install drivers on WinPE ...
2014-01-15 14:34:03, Info                         PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:03, Info                         PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:03, Info                         PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:03, Info                         PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:03, Info                         PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:03, Info                         PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:03, Info                         PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:03, Info                         PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:03, Info                         PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...

after few lines :

2014-01-15 14:34:06, Info                         PnPIBS: Exiting PnP callback to install drivers on WinPE ...
2014-01-15 14:34:06, Info                         PnPIBS: Entering PnP callback to add drivers to the offline image ...
2014-01-15 14:34:06, Info                         PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:06, Info                         PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:06, Info                         PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:06, Info                         PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:06, Info                         PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:06, Info                         PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:06, Info                         PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:06, Info                         PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:06, Info                         PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...

here i believe it should have gone for z:\script\madhmeht

please let me know if  I am doing anything wrong.

My sole aim is to have drivers in offlineServicing, but somehow its not reading them.

Thanks in advance.

↧
↧

WDS Multicasting MDT 2010 created SOE

February 21, 2013, 4:41 pm
$
0
0

I'm just wondering if the following scenario is possible with the setup we currently have.  The architecture we've implemented is:

  • MDT 2010 on Win2008 R2.  No clients build from this server.
  • Windows 2008 R2 servers with the WDS Transport Server role only.  We have no AD in the environment, so this is what I'm limited to.  Clients connect via PXE to these servers to image, using a WinPE LTI.

Multicast has been setup and configured, and it working successfully for the base OS .wim file only.  Once the client moves further into the task sequence and begins installing additional applications, their traffic falls back to Unicast.

Is it possible to maintain multicast throughout the entire imaging process given this environment and its limitations?

↧

Windows Deployment Server with Update step enabled and Blocking IE11 (Blocker didn't work)

January 15, 2014, 9:32 am
$
0
0

Greetings.

I am experiencing something very strange with our Windows Deployment Servers.

I have WDS 2013 with AIK-8.1 combination server to do our machine deployment. Some of our machines need to have IE11 blocked from installation (for compatibility issue). As in case with IE10 before we installed blocker from microsoft and then captured image. I double checked and the registry keys for the blocker are present in correct location and if I run updates on the machine before capture it doesn't attempt to install IE11.

Problem is during deployment during automatic update step (post application update) the system picks up and installs ie11.

If I remove it by hand after installation is over and run windows update - it's not installed. If I disable auto-update step in installation - and run updates by hand after deployment is finished- then all works as expected and ie11 not installed.

Does anyone else experienced this scenario when blocker doesn't seem to have effect for automated update installation in deployment?


↧

Can't find the users/groups for sharing/security

January 15, 2014, 6:49 am
$
0
0

I have been working on starting setting up two windows 2008 r2 servers. The other day I added groups and users for the company. There are 36 users and groups. Afterwards, I set up a hard drive for each of my 6 departments. I came across a problem when I tried sharing the hard drive and setting the permissions on them. I right-clicked any of the drives -> properties-> sharing ->  Advanced Sharing... -> check box to "Share this folder" -> Permissions -> Add... -> Advanced -> Set the location to the correct place where the groups are and then click Find Now.  Sometimes Windows will bring up a Log-In window for an administrator to log in, I'm already logged in as an administrator. After entering the correct information, another window comes up and says " The following error occurred while using the user name and password you entered: A local error has occurred." 

After letting the search finish, the only users that come up are the Built-In ones. No other users or groups appear. If I un-check the built-in from Object Types,  the search tells me there is a local error or the server isn't operational. The same thing happens when I go to the Security tab to add users/groups. Can someone please help me figure out why the users and groups that I've added aren't showing up. 

↧
Viewing all 2818 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>