First off, i am new to WDS so I apologize if I missed something that might be obvious to anyone of you. I've built a WDS server on a Windows 2008 R2 box. I've loaded a boot.wim and a install.wim from my sysprepped image. I've also loaded drivers to the
boot.wim so that it loads over PXE now. My install image is set to auto-multicast and shows in the Multicast Transmissions group with no authorization needed for known or unknown clients. When I boot a client PC, DHCP picks up, I press F12, it loads the boot
image but stops at a cmd prompt window in the boot image. I loaded imagex and gimagex into the system32 folder and used gimagex to quickly look for the install.wim and found nothing. From everything I've read and seen, the install image should link or launch
once the boot image is up. I'm way behind on my imaging schedule and would greatly appreciate any usable advice, thank you in advance!
↧
