Hi Guys
Before we made this change our WDS server was also our DHCP Server and it worked fine.
What we have done to increase redundacy and to no longer rely on a server for our DHCP.
We decided to setup our Cisco 3750X core switches to Become the DHCP Server.
Everything works fine from a desktop point of view in that all desktops from all 3 of our different subnets receive an IP Address from the DHCP of the Switch.
Unfortunately The WDS server is no longer working we get a fail to connect to the WDS.
The first thing I though was to disable the 67 and 60 options that we originaly had configured as was required when the WDS and DHCP are on the same Server.
That didn't make a difference.
The only way I can get it to work is to reactivate the scope on the WDS server and re chek the 60 and 67 options then it works again but that defeats the purpose of the whole exercise.
Any ideas are there some extra configurations we need to make on the switch?
Or is there any changes we need to make on the WDS.
THe 3750X switches is also our router for all the differnet subnets so it effectivly has direct connection with all subnets.
Thanks in advance
