When trying to push the image through PXE boot I am getting "WDSClient: An error occurred while starting networking"
To start, this was a working image up to 1 week ago. It connects to our tftp server fine and loads the .SID file. The .wim file takes a lot longer than normal to load and once it does I get the error. For troubleshooting I have done the below:
1. Verified the manufacture drivers are loaded to the .wim
2. Re-added the drivers to the .wim
3. Took a working .wim from our remote site and replaced the current .wim file on the problematic server
a.) Verified the .wim I imported was good by pushing the image across the WAN
4. Removed WDS from server and re-installed
Any suggestions on what I need to try next is very appreciated.