Hello,
I am having an issue with WDS capturing. I have an HP Proliant ge8 running server 2012R2 properly configured as my DC / WDS. I added my boot.wim boot file to my bootable images and verified that I could boot to a WinPE image on my test unit. In the WDS config I right clicked and properly created my capture file using the same Boot.wim file listed above and added my NIC driver and my raid driver. These drivers are 64x and so is the unit I am attempting to capture.
I ran sysprep on my target machine and generalized my system then rebooted it to my capture image. It loads the windows icon and then goes to a black screen. I receive the following error on my WDS, in my event logs.
Error 6/12/2015 17:21:05 Deployment-Services-Diagnostics 57347 None
The PXE server processed a request from a client of architecture x86. However there were no boot images installed for this architecture. PXE clients of this architecture will not be able to complete the boot process successfully. To resolve this problem, add at least one boot image for this architecture.
I installed 64x image files, the boot.wim file came from my server 2012R2 DVD. The drivers i added to my package are 64x drivers taken from my image. The server i am attempting to capture a image from is identical to my wds server, same hardware and same architecture.
Do I need to configure a x86 Boot.wim boot file / capture image in order for my 64x machine to be able to capture?
Does anyone have any ideas?
