Hi all,
I have another thread open regarding a specific returnc code, but here is anothe issue I am noticing on another network:
When multicasting to just one machine (obviously the master multicast client), there are many packet retries due to NACK responses form this master.
If I check performance logs I can see a ration of at least 1:5 (sends:resends)!! This is obviously slowing down multicasting.
This happens on multiple clients (individually) with different NICs (they are only out of box supported by intel at the moment).
These switches are set up for multicasting based on our previous Ghost multicasting (IGMP configured).
No collisions/errors on the switch.
There are no errors reported in the Admin/Ops event logs.
I set up two different servers on different areas and get the same result where ever I image.
I tried changing the multicast adress ranges, but no success.
Any advice? Perhaps I am missing a step in the WDS role setup?
I have another thread open regarding a specific returnc code, but here is anothe issue I am noticing on another network:
When multicasting to just one machine (obviously the master multicast client), there are many packet retries due to NACK responses form this master.
If I check performance logs I can see a ration of at least 1:5 (sends:resends)!! This is obviously slowing down multicasting.
This happens on multiple clients (individually) with different NICs (they are only out of box supported by intel at the moment).
These switches are set up for multicasting based on our previous Ghost multicasting (IGMP configured).
No collisions/errors on the switch.
There are no errors reported in the Admin/Ops event logs.
I set up two different servers on different areas and get the same result where ever I image.
I tried changing the multicast adress ranges, but no success.
Any advice? Perhaps I am missing a step in the WDS role setup?
